Magnetic Mica Powder - Ferro 3D Cat Eye Chatoyant Duochrome Fine Powder- CHOOSE COLOR
$8.64
👉 JARS come in TWO (2) GRAMS OF PIGMENT except for Phantom Blue, it is aprox. 1.75 grams.
* "Chatoyant" aka "Cat Eye", "5D", "Tiger's Eye", "Magnetic Mica Pigment", "Ferromagnetic" or "Magnetic Chameleon"; however you want to call them, these are super cool for your next resin project! Gorgeous color shift of two or more colors in each blend (EXCEPT for Golden Eye - it's just a gorgeous singular color that does not shift).
* CHOOSE COLOR of the colors shown, at the quantity per gram weight you choose (each color is sold separately, this listing is NOT sold as a set).
* You only need a tiny little bit of pigment mixed into the gel or resin medium to get the shifting chatoyant effect. Start with a small amount, and add more until desired saturation is met. A little goes a long way!
* These pigments require the use of a magnet to achieve the chatoyant (cat's eye) effect. We recommend a strong neodymium magnet.
COLOR DESCRIPTIONS:
- Lilac Pink: Bright rosy pink that has a lilac highlight
- Cactus Blossom: A bright yellow-green with rose red highlights
- Phantom: Deep blues shifting to violets and magentas
- Moon Beam: Soft teal blue shifting to muted purples
- Agave Green: Earthy muted greens with a muted blue undertone, just like an agave cactus!
- Earth Angel: Muted lilac purple shifting to rosy gold tones
- El Dorado: A coppery warm orange-gold tone with shimmer
* How To Work: You can use a UV cured resin (or nail gel) as it will "freeze" the particles into place immediately, and have less risk of the particles unaligning from the magnet manipulation. If using a two part epoxy, you will need to have the magnet set in place over (or under) your piece until it cures fully. Simply take the amount of resin you want to work with and add a small amount of the pigment, start with a little (perhaps 1/10th of a gram), and mix in, add more to get the saturation you need, a little goes a LONG way. Pour into your silicone mold and move the magnet over the top, being careful not to touch it with the resin. You should immediately see the pigments shift to one angle or another. If you use multiple magnets, you can achieve more complex designs. If you don't like the effect you have, or if the pigments look "dull", simply keep swiping the magnet over the top to align the particles into what you like. Sometimes it takes a little fiddling with! Then fully cure. You can also do several layers of resin and colored resin to build up your piece with multiple designs.
*Video by Danner Builds, home of awesome handmade resin molds! 👍 https://www.etsy.com/shop/DannerBuilds
Check us out on Instagram; @jetagestudio
Returns & Exchanges
I gladly accept returns, exchanges, and cancellations
Just contact me within: 7 days of delivery
Ship items back to me within: 14 days of delivery
Questions about your order?
Please contact me if you have any problems with your order.
Frequently Asked Questions
Are your pigments cosmetic safe?
Many of them are! Each listing gives specific uses or exceptions to a particular pigment, so look for that in the description section. When in doubt, feel free to send a convo.
Can I use your pigments in resin or polymer clay?
YES! As a working artist, I love the versatility of using unique pigments across many creative mediums, so I only stock those that are solvent safe, are non-fading, are safe for heated mediums up to at least 400F and of course are non-toxic to our health. All you need is a transparent carrier to suspend the pigments in, or raw polymer clay to put them on the surface, and you're good to go!
What about nail art?
Of course! All of our pigments are suitable for nail art and will create amazing unique effects. I would recommend using the flakes or powders with a gel coat medium and UV cure lamp for instant results.
Can I use your pigments to embellish something edible?
Although our flakes and powders are non-toxic, they should not be considered edible or ingestable. I would stick with food-quality products only.
Why are some pigments called "high temp", but not others? Do I need anything special to use these?
The original Lumiere Luster line is a new dichroic-like product for lampworking artists, such as myself, which is where the flake's high temp designation originated. But I found that they are just as amazing to work with in other mediums, not just for lampworkers! However, for lampwork or glass enamel use, use only those that are in our "high temp" section to ensure they're safe for glassworking temperatures (1000+ degrees F). You can also download a copy of my free PDF tutorial here: http://www.jetagestudio.com/PDF/Lumiere%20Lusters%20tutorial%20JetAge%20Studio.pdf
If you're not a glassworker, the "high temp" designation is pretty much meaningless, so you're safe to use ANY of the pigments in any medium you like, with beautiful results.
Where's that free lampworking PDF you mentioned?
Pop this thread into your browser address bar:
http://www.jetagestudio.com/PDF/Lumiere%20Lusters%20tutorial%20JetAge%20Studio.pdf
Why are these flakes of yours so "fly-away"?
We get that a lot! It's the nature of this particular product. Kind of an industrial marvel if you ask me how lightweight they are! We like to fill the jars right up to the top so it might be a little messy when you first open the jars; we sincerely apologize for this. Just be sure you aren't working with the flakes around any open windows or fans and it should cut down on how much they fly around. Remember: Art is Messy! 😁
Can your flakes be used on paper or scrapbooks?
Yes. There's quite a few awesome YouTube videos out there about paper embellishment with metallic foils or gilding flakes. Our flake pigments (and powders as well) will work exactly the same as metal leaf or foils. Take a look at this great video for some inspiration and a how-to use with different types of "glues" to stick down the flakes: https://www.youtube.com/watch?v=rtq_UeJddyc
In addition to that, we've had some watercolor artists ask if they can make custom watercolor pan pigments with our fine powders and the answer is "yes"! It might take a little fiddling to find the right ratio of pigment to binder, but that's where your creativity comes in. Experiment with our ultra fine Discotek powder or ultra fine super shift powders!
Can I use your pigments in soaps and lotions?
Most likely, yes. I don't know all the different base formulas in soap arts but most of our mica based pigments should work just fine and are cosmetically safe. I would not recommend our chameleon flakes, however, unless it is used as a surface finishing touch (not mixed in). Testing is recommended for coloring and shimmer effects desired.